© 2004 SAGE INSTRUMENTS
9100-0925-01 V1.2
37
On Hook Voltage
-51.3 V
P
Loop Current
33.0
mA
P
Dial Tone Delay:
597 ms
P
Connect Time:
4.1 s
P
Circuit ID:
1
¾
761-0000
Responder ID:
777-8787
User ID: 2
½
Steve23
Work Order:
1237777098
•
cnotch — C-message notch filter noise measurement (dBrnc)
•
s/n — Signal-to-noise measurement (dB)
DVM
The results for DVM show the line parameters for the
test interface.
•
On Hook Voltage
•
Loop Current
C
ALL
P
ROGRESS
The results for Call Progress show the test call
connection parameters.
•
Dial Tone Delay — off-hook to dial-tone detection
elapsed time
•
Connect Time — last out pulsed digit to farend
TPT detection elapsed time
T
EST
I
NFO
The results for the Test Info show the test call
identification parameters in two screens.
•
Circuit ID — phone number under test
•
Responder ID — farend test responder number
•
User ID — field test person ID
•
Work Order — work order number for test
Exporting Results
Results can be exported in space delimited, ASCII format through the 925VST serial port.
Result should work with any PC terminal emulator program set to VT100
(i.e.
Hyperterm). There are three levels of result export:
•
All results: Exports results for all work orders.
•
Single work order: Exports results for a selected work order.
•
Single test results: Exports results for a selected test.
For information on connecting via an RS-232 cable, see Serial Port on page 15.