3.2 Connecting to Computer
Only install the software, don’t need to install any driver.
Operation cannot be guaranteed in the following cases:
• When connection has been made to a USB hub or an add-on
USB board
• When you are using a custom-built computer or one that you
have modified
Be sure to observe the following:
• Do not connect or disconnect the USB cable while you are installing
the USB driver
• Do not connect or disconnect the USB cable while starting up the
computer or the plotter
• Do not disconnect the USB cable within a 5-second period of
connecting it
• Do not connect or disconnect the USB cable while data is being
transferred
• Do not connect multiple plotters to a single computer
Use a USB cable or an RS-232C cable in accordance with the
interface chosen.After the connection is successful, the software
will show whether the normal connection.
