Specialized in developing,designing and manufacturing kinds of vinyl cutter
2.installing and testing
6.1 set cutting plotter
●
Please insure that the machine on flat,solid ground ,keep using the
environment clean and dry .
●
The machine suitable for 110V/220V voltage
，
Please be sure to use and the
corresponding voltage matching.
●
Turn on the power switch ,the carriage will automatically move to the right
and left and then stop when switched ON.if you need to adjust position of the
carriage,Please according to the panel adjust to position of the carriage,never
use your hands move carriage
6.2Please as following machine USB lead and com cable (RS-232) ,connector
cutting plotter and computer.
6.2-1 Installing the USB lead
，
USB2.0
The lead suitable for Windows7/Windows8 and Windows XP
。
Nonsupport Windoes95/98/Me system.
Please make sure that the machine supporting the use of software.,such as
Dragoncut software
，
Flexi software
，
Artcut
，
signcut etc .
6.2-2 How to installation USB print driver
Notice
：
Please install the USB print driver then connector the cutting plotter.
●
Double-lick the CD in the setup. exe
，
the computer will automatically install
the USB driver as a new portCOM1or COM2
●
Connect the USB lead to the cutting plotter and the computer USB port .
●
Windows will detect the cutting plotter and install the USB printing driver
automatically,please be patient and give Windows sufficient time to recognition
and install the driver.
●
If is a 32 bit system can be installed directly, if it is a 64bit system, please
install as administrator.
●
Please check for the driver in Device manager under universal serial .Bus
controllers/USB printing support.If the (USB printer support driver
）
does not
appear,please re-check the power and of the USB lead connection and ensure
the plotter is switched on.
