Proc sheet 1 01
myC2-3
5HPRYHDQGSODFHWKH
DVVHPEOHG
ORZHUKRXVLQJRIPRELOH
1/1
7RROV
-Cross shared screwing , Fixture for screwing
3UHOLPLQDU\RSHUDWLRQ
Remove the battery (Proc sheet 0 01)
5HPRYDOSURFHGXUH
1. Remove the mask antenna screw (1) and remove the screw antenna (2).
2. Remove the 3 torx screw (3) on the lower housing (4).
3. Take apart delicately the assembled lower housing beginning by the bottom (5).
4. Take off the assembled lower housing.
3ODFHPHQWSURFpGXUH
1. Place the new assembled lower housing (4) by positioning at first the top then press on the
bottom for assembled.
2. Place the mobile on the tool and screw the antenna (torque of 0.08 N.m ). Add the mask
antenna screw.
3. Screw the 3 torx fixing screws (torque of 0.09 N.m ).
)XUWKHURSHUDWLRQV
1. Place the battery (Proc sheet 0 01).
Procedure
Symptom
Test
REF MTB DTS 8- Indice B - February 21 2006
Page 5-8
Содержание Sagem Communication myC2-3
