MorphoAccess® SIGMA Extreme Series - Installation Guide
Identity & Security
Section 4 :Electrical Interface
36
This document and the information therein are the property of
Safran Identity & Security
.
They must not be copied or communicated to a third party without the prior written authorization of Safran
2017_2000024418 - V1
Wiring overview
Before proceeding, make sure that the person in charge of installation and
connections is properly connected to earth, in order to prevent
Electrostatic Discharges (ESD).
Power supply ground shall not be used for peripheral ground. All other
grounds can be used indifferently.
Note that all connections of the MorphoAccess® SIGMA Extreme Series terminal
described hereafter are of SELV (Safety Electrical Low Voltage) type.
Figure 12: Cabling layout