COMMAND RANGING & TELEMETRY UNIT CORTEX
Is.Rev.
Date:
© Safran Data Systems
This document is the property of
Safran Data Systems
.
It cannot be duplicated or distributed without expressed written consent.
Page xxiii
Risk of electric shocks
WARNING:
To avoid personal injury or equipment damage,
disconnect the power cable
(TWO cables in case of redundant power supply) before performing any technical support.
Disconnection
, all power plugs
Explosive atmosphere
WARNING:
Do not operate the equipment
in the presence of flammable gases or fumes
.
Operation of any electrical equipment in such an environment constitutes a definite safety
hazard.
Battery
Risk of explosion
if battery replaced with an incorrect type. Dispose of used batteries
according to the instructions.
Installation
Installation in a rack
: This unit must be used in a 19” rack mount cabinet only
L
IFTING THE UNIT
:
I
F THIS APPARATUS WEIGHS OVER
25
KGS
,
SO TAKE EXTREME CARE WHEN
LIFTING OR MOVING THIS UNIT
.
W
E RECOMMEND THAT TWO PEOPLE ARE AVAILABLE TO LIFT THIS
UNIT
.
V
ENTILATION
:
D
O NOT BLOCK ANY VENTILATION OPENINGS
.
E
NSURE THAT THE PRODUCT
VENTILATION IS NOT IMPEDED
.
Cleaning
To clean the equipment, use a damp cloth without detergent. Make sure that the equipment
is not connected to the mains (cable disconnected).