V1.0 2021 Copyright Safewaze
Page 11
The 9013 comes fully assembled and ready for installation. Use the following instructions and Figure 8 to install the 9013 Behind the Web Bracket.
FIGURE 8 - 9013 DUAL BRACKET INSTALLATION
To Fasten To Harness:
1. Ensure that the curved portion of 9013 is in a downward orientation relative to the harness (See Dwg. 1).
2. Simultaneously depress both locking button (A) and slide lock (B) (See Dwg. 2) to swing the bracket open as indicated
(See Dwg. 3).
3. With the bracket open, install dual leg retractables onto the bracket via the swivel tops of each. Swivels should be hanging on the
curved portion of bracket.
4. Slide the bar behind both loops of webbing at dorsal D-ring. Swing the bracket closed until it locks into place.
5. Check the locking function of the bracket by attempting to wing the bracket open WITHOUT depressing locking button (A) or
slide lock (B). Bracket bar should not move and the bracket is now locked into place.
6. Dual leg Retractables can be easily installed and removed from bracket by once again depressing both locking button (A) and
slide lock (B), which allows bracket to swing open without complete removal from harness.
3.0 HARNESS CONNECTION WITH THE 9013 BEHIND THE WEB BRACKET
1
2
PUSH
SLIDE TO OPEN
1
PUSH
2
SLIDE TO OPEN
1
PUSH
2
SLIDE TO OPEN
1
2
PUSH
SLIDE TO OPEN
Swing Gate Open
Slide Lock
(2)
Slide Lock
Bar assembly of bracket which inserts behind webbing
at dorsal D-ring
9013 in opened
configuration
Push Button
(1)
Push Button
LOAD IN
DICATO
R
LOA
D IN
DIC
ATO
R
A
FALL-ARREST
1
2
PUSH
SLIDE TO OPEN
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
ANSI Z359.14
, ANSI A10.32
,
OSHA 1910.66,
OSHA 1926.502
ASTM F887
020005
LOAD IN
DICATO
R
LOA
D IN
DIC
ATO
R
A
FALL-ARREST
1
2
PUSH
SLIDE TO OPEN
LOAD IN
DICATO
R
LOA
D IN
DIC
ATO
R
A
FALL-ARREST
2
SLIDE TO OPEN
1
PUSH
Dwg. 2
Dwg. 3
Dwg. 4
Dwg. 5
Dwg. 6
Dwg. 1
3.1 HARNESS CONNECTION WITH THE SW-9012 BEHIND THE WEB BRACKET
LOAD IN
DICATO
R
LOA
D IN
DIC
ATO
R
A
FALL-ARREST
Arc Flash
i
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
Arc Flash
i
ANSI Z359.14, ANSI A10.32,
OSHA 1910.66, OSHA 1926.502
ASTM F887
020005
The SW-9012 comes fully assembled and ready for installation. Use the following instructions and Figure 9 to install the SW-9012 Behind the Web
Bracket.
To Fasten To Harness:
1.
Ensure that the curved portion of SW-9012 is in a downward orientation relative to the harness (See Dwg. 1, Figure 9).
2. Simultaneously depress both locking buttons (A) and (B) (See Dwg. 2, Figure 9) and slide the bracket open as indicated
(See Dwg. 3, Figure 9).
3.
With the bracket open, install dual leg retractables onto the bracket via the swivel tops of each. Swivels should be hanging on the curved
portion of bracket.
4. While pressing in on locking button (A) slide the bar behind both loops of webbing at dorsal D-ring until the bar locks back into place.
5. Check the locking function of the bracket by attempting to slide the bracket open WITHOUT depressing locking buttons (A) or (B).
Bracket bar should not move and the bracket is now locked into place.
FIGURE 9 - SW-9012 DUAL BRACKET INSTALLATION
Curved Portion
of SW-9012
Bar assembly of bracket which inserts
behind webbing at dorsal D-ring
Dwg. 1
Locking Button (B)
Locking Button (A)
Dwg. 2
Diagram of SW-9012 in opened
configuration
Dwg. 3
Dwg. 4
