User Manual
V1.0 2017 Copyright SAFEWAZE ™
Page 11
Inspection and Maintenance
Inspection
Inspect the device for corrosion and/or damage.
Check the Housing Plates for signs of distortion.
Ensure that the Housing Plate Pins are not damaged and that the plate can freely
move and seats properly on the pins.
Check that the tensioner lever opens and operates properly.
Ensure the swivel element on the rope is free to swivel and there are not cracks or
structural defects.
Inspect both the webbing and rope for cuts, abrasions and contamination.
Maintenance
Any SAFEWAZE™ FS807 Horizontal Lifeline components requiring maintenance must
be tagged “unusable” and removed from service.
Cleaning maintenance may be performed by the user.
Repairs to the product may only be made by the manufacturer or entities authorized in
writing by the manufacturer.
THIS DEVICE MUST ONLY BE SERVICED BY A TRAINED AND COMPETENT INDIVIDUAL!
NEVER ATTEMPT TO SERVICE THIS UNIT OR TAMPER WITH ITS FUNCTION IN ANY WAY!
Storage
When not installed, the SAFEWAZE™ FS807 Horizontal Lifeline should be stored in a
cool, dry place out of direct sunlight. Do not store in areas where damage from
environmental factors such as heat, light, excessive moisture, oil, chemicals and their
vapors, or other degrading elements may be present. Do not store damaged
equipment or equipment in need of maintenance in the same area as product approved
for use. Equipment that has been stored for an extended period must be inspected as
described in these User Instructions prior to use.
