Copyright Safewaze 2022
Page 15
8.5 DISPOSAL
Dispose of the Safewaze SRL if it has been damaged by fall arrest forces or inspection reveals an unsafe or defective condition that cannot be repaired
by an authorized Safewaze Service Center. Before disposing of the SRL, cut the lifeline in half so that it is not mistakenly reused.
FIGURE 11 - NORTHSTAR CLASSIC LABELING
9.0 LABELING
Ø 83mm
ANSI Z359.14, ANSI A10.32
OSHA 1910.66, OSHA 1926.502
020097
Ø 83mm
020098
FS-FSP1215-G
FS-FSP1215-G
WARNING: User must read and understand all
instructions, provided with this product at time of
shipment, prior to use.
DO NOT ATTEMPT TO SERVICE OR REPAIR THIS
UNIT! CONTACT SAFEWAZE™ FOR SERVICE OR
REPAIR INFORMATION.
USE: This is a single person fall arrester device.
Connection of this device to a full body harness is to
be made to the dorsal D-ring only. User must ensure
that any connection to anchorage is properly secured
prior to use. Avoid lifeline contact with sharp or
abrasive edges. Avoid chemical, thermal and/or
electrical hazards. This product is suitable for use
with horizontal lifelines and horizontal positioning.
Fall clearances must be calculated by a Competent
Person prior to use. Avoid swing fall hazards. Fall
clearance number for this device is based upon unit
installed in an overhead vertical position in-line with
the user. Not to be used for leading edge applications
INSPECTION: Device must be inspected prior to
each use. Inspect device per instructions to include
Locking Function Test (sharp pull test), retraction test,
label legibility, any evidence of damage or defects, or
missing components or parts. Inspect housing,
connectors, fasteners and full length of lifeline
component for any damage or defects. This product
must be inspected in accordance with the
manufacturer’s instructions. Unit must be removed
from service if exposed to fall arrest forces. Fall
indicator is a swivel indicating snap hook;
immediately remove unit from service if swivel
indicating snap hook is deployed.
Specifications:
Working length: 15 ft (4.57 m)
Material: 3/16 in galvanized steel cable; steel
hardware; nylon and glass fiber housing
Capacity range: ANSI, 130-310 lbs (58.96-140.61 kg)
OSHA, up to 420 lbs (190.51 kg)
Average arresting force: 1350 lbs (612.35 kg)
Max arrest force: 1800 lbs (816.47 kg)
Max arresting distance: 24 in (60.96 cm)
Free fall limit: 24 in (60.96 cm)
Class A unit
15’ Single Leg / Swivel Indicating Snap Hook
1
2
3
4
5
Inspection
Year
MUST FOLLOW ALL MANUFACTURER’S INSTRUCTIONS
INCLUDED WITH THIS EQUIPMENT. DO NOT REMOVE LABEL.
Ø 158.5mm
ANSI Z359.14, ANSI A10.32
OSHA 1910.66, OSHA 1926.502
Ø 158.5mm
FS-EX1550-W
Ø 135mm
ANSI Z359.14, ANSI A10.32
OSHA 1910.66, OSHA 1926.502
020112
Ø 135mm
020113
1
2
3
4
5
Inspection
Year
MUST FOLLOW ALL MANUFACTURER’S INSTRUCTIONS
INCLUDED WITH THIS EQUIPMENT. DO NOT REMOVE LABEL.
WARNING:
User must read and understand all
instructions, provided with this product at time of
shipment, prior to use.
DO NOT ATTEMPT TO SERVICE OR REPAIR
THIS UNIT! CONTACT SAFEWAZE™ FOR
SERVICE OR REPAIR INFORMATION.
USE: This is a single person fall arrester device.
Connection of this device to a full body harness is
to be made to the dorsal D-ring only. User must
ensure that any connection to anchorage is properly
secured prior to use. Avoid chemical, thermal
and/or electrical hazards. This product is suitable
for use with horizontal lifelines and horizontal
positioning. Fall clearances must be calculated by
a Competent Person prior to use. Avoid swing fall
hazards. Free fall limit is 5 ft.
INSPECTION: Device must be inspected prior to
each use. Inspect device per instructions to include
Locking Function Test (sharp pull test), retraction
test, label legibility, any evidence of
damage or defects, or missing components or
parts. Inspect housing, connectors,
fasteners and full length of lifeline
component for anydamage or defects.
This product must be inspected in
accordance with the manufacturer’s
instructions. Unit must be removed from
service if exposed to fall arrest forces.
Immediately remove unit from service
if energy absorber is deployed.
Specifications:
Materials: 3/16 in galvanized steel cable; steel
hardware; nylon and glass fiber housing
Capacity range: 130-310 lbs (58.96 kg-140.61 kg)
Average arresting force:
1350 lbs (612.35 kg)
Max Arresting Distance:
24 in - Overhead use
54 in - Below dorsal D-ring use
Setback distance: 3 ft (0.91 m)
Minimum fall clearance: 12.5 ft-16.5 ft
(3.81 m-5.03 m)
Class A unit
FS-FSP9030
FS-FSP9030
LE
30’ Cable SRL
