Page 2
1.
Do not
use this equipment for any purpose other than tensioning the SafeLink Horizontal Lifeline System.
2.
Do not operate
if the FS-EX2510 is
restricted from
forming a straight line with
HLL
direction.
3.
Do not operate
the FS-EX2510
with twisted, kinked, or
damaged wire rope
.
Inspect wire rope carefully
before every use.
4.
Do not
use the FS-EX2510 is inspection reveals
damage or malfunction
.
Inspect
the FS-EX2510
carefully
and
test operation
prior to each
use.
5. Do not attempt to add or use any type of "extension" to the FS-EX2510 Handle.
6. Do not operate with wire rope not centered in its groove.
7. Do not remove or cover warning labels and/or tags.
8. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible
conditions and situations that may occur.
S
PECIFICATIONS
INSPECTION
This equipment must be inspected prior to each use, and at least annually by a Competent Person other than the
user. If inspection reveals any damage such as, but not limited to: kinked or frayed cable, handle bent or deformed,
anchor and/or load hook damaged or inoperable, cut or damaged cable strands,
frame damage such as bending or
twisting, pawl spring damage, or pawl spring nonoperational, or missing.
Not only must the FS-ES2510 be inspected prior to each use, it must also be inspected as an overall component of
the SafeLink Horizontal Lifeline System. Please see SafeLink Horizontal Lifeline System Manual for specific
inspection criteria.
Working Load:
1,000 lb. capacity
Pull Capacity:
2,000 lb. pull capacity
Maximum Length:
12 ft.
SAFETY INFORMATION AND PRECAUTIONS
User must read, understand, and follow all safety and usage information contained within this manual prior to
use of this equipment. Failure to follow all safety and usage information can result in serious injury or death.
Intended Use:
The equipment covered in this manual is intended for use as part of a complete Personal Fall Arrest System (PFAS).
Use of this equipment for any other purpose, such as material handling, sports activities, or other action not described in
these User Instructions is
not approved by Safewaze. Use of this equipment in a manner outside the scope of those
covered within this Manual can result in serious injury or death.
The equipment covered in this manual is only to be used by trained personnel in workplace applications.
1.
Check operating
components and controls
for proper operation,
and proper adjustment.
2.
Braking System Inspection
a.
The braking system must automatically stop and
hold up to the rated load if the lever is released.
3.
Hook Inspection
Check hooks for the following:
a.
distortion, such as bending, twisting,
or increased throat opening
b.
wear
c.
cracks, nicks, or gouges
d.
hook attachment and securing means
