11
Install Forward Facing - Group 1 (9 to 18kg) - Seat Belt Install
The child seat has 3 adjustable forward facing levels, position 1,2 & 3.
1 - Adjust the recline position by pulling the red handle at the front of the seat
and adjust the seat to one of the forward facing positions (Fig.1).
2 - Place the child seat in a forward facing position on the rear seat of your car.
3 - Pull the vehicle seat belt out as far as possible. Thread the lapbelt section
through the slot on the side of the seat and the diagonal belt over the top of
the seat behind the headrest. Thread the vehicle seat belt Tongue through
the opening at the back of the seat and then back through the other side.
Thread the tongue through the gap on the side of the seat then clip the
tongue into the buckle (Fig.3 & 4).
4 - Pull the diagonal belt section as hard as you can and place the red Lock-Off
clip on the diagonal belt as close to the vehicle seat belt buckle as possible.
DO NOT place it over both belts (Fig.5).
5 - Pull the diagonal belt upwards to release any slack on the seat belt (Fig.5).
Fig.1
Fig.2
Fig.3
Fig.4
Fig.5
