19
Sanding Operations
Operational Checklist
Before operating your unit, completely
read and have a full understanding of
this operator’s manual.
You should not operate your unit unless you have
a full understanding of how the machine operates.
Before operating your machine, review the
following steps.
1. Three-phase machines: Double-check the
contact roller rotation and/or sand paper.
Confirm that your sand paper is turning
counter clockwise. See Fig. 31.
2. All access doors are to remain closed for
operation.
3. Make sure all machine guards are bolted in
place and the belt loading door is closed. See
Contact
Roller
Should
Turn
Counter-
Clockwise
Belt
Loading
Door
Fig. 32.
4. Adjust the conveyor table to the proper height
for the thickness of the material you are
sanding. Refer to the “Table Height
Adjustment Gauges” page 15. Also shown in
Fig. 33.
Before operating the machine, the
operator must be familiar with the
operating procedures of the machine.
Do not operate the machine without
full knowledge and understanding of the steps in
operating the unit.
Figure 31: Contact Roller Should Turn
Counter-Clockwise
Machine Guard
Machine Guard
Machine Guard
Figure 32: Machine Guards
Table Height
Adjustment
Figure 33: Table Height Adjustment
