background image

8

Safety

Link 

Pty Ltd | ABN 83 081 777 371 | www.safetylink.com

Head Office: 54 Bonville Ave, Thornton, 2322, NSW, Australia

1300 789 545   |   +61 2 4964 1068

Asia-Pacific/The Americas   |   [email protected]   

Europe/Africa/Middle East   |   [email protected]

Northern Europe   |   [email protected]

WARRANTIES

EXTRACT: SAFETYLINK PTY LTD STANDARD TERMS AND CONDITIONS

1.1 

To the extent permitted by law all implied conditions, warranties and undertakings are expressly excluded.

1.2 

Except as provided in this clause the Company shall not be liable for any loss or damage, whether direct or indirect (including consequential 

losses or damage) arising out of any breach of contract by the Company or any negligence of the Company, its employees or agents.

1.3 

Should the Company be liable for a breach of a guarantee, condition or warranty implied by the Australian Consumer Law (not being a 

guarantee, condition or warranty implied by sections 51, 52 and 53 of that Law) then its liability for a breach of any such condition or warranty express 
or implied shall be limited, at its option, to any one or more of the following.

in case of Goods

the replacement of the Goods or the supply of equivalent Goods.

II 

the repair of the goods,

III 

the payment of the cost of replacing the Goods or acquiring equivalent Goods.

IV 

the payment of the cost of having the Goods repaired. Provided that any such Goods are returned to the Company by the Purchaser at 
the Purchaser’s expense.

in the case of services

the supply of the services again,

II 

the payment of the cost of having the services supplies again.

1.4 

The Company is not liable for the costs of recovery of the Goods from the field, loss of use of the Goods, loss of time,  inconvenience,  

incidental  or  consequential  loss  or  damage,  nor  for  any  other  loss  or  damage  other than  as stated above, whether ordinary or exemplary, 
caused either directly or indirectly by use of the Goods.

1.5 

The  Company  warrants  that  at  the  time  of  shipment,  Products  manufactured  by  it  will  be  free  from  defects  in material  and 

workmanship.   In the  absence of a modified written warranty, the Company agrees to making good any such defects by repairing the same or at the 
Company’s option by replacement,  for a period of (1) one year from the date of shipment.  This limited warranty applies provided that: 

defects have arising solely from faulty materials or workmanship;

the Products have not received maltreatment, inattention or interference;

the Products have been installed in accordance with the Company’s Installation Handbooks using only products supplied by the Company;

accessories used with the Products are manufactured by or approved by the Company

the Products are maintained in accordance with Australian Standard 1891.4 (section 9).

you notify any claim under this warranty to SafetyLink in writing to the address below no later  than 14 days after the event or occurrence 
concerning the produce giving rise to the claim and you pay all costs related to your claim.

This warranty does not apply to any defects or other malfunctions caused to the Goods by accident, neglect, vandalism, misuse, alteration, modification 
or unusual physical, environment or electrical stress. 

Please note that the benefits to the purchaser (as a consumer) given by this warranty are in addition to your other rights and remedies under the Australian 
Consumer Law.  Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.  You are entitled to a replacement or 
refund for a major failure and compensation for any other reasonably foreseeable loss or damage.  You are also entitled to have the goods repaired or 
replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

1.6 

If any goods are not manufactured by the Company, the guarantee of the manufacturer thereof shall be accepted by the Purchaser as the only 

express warranty given in respect of the goods.

1.7 

Except  as  provided  in  this  clause  11,  all  express  and  implied  warranties,  guarantees  and  conditions  under  statute or general law as 

the merchantability, description, quality, suitability or fitness of the Products for any purpose or as to  design,  assembly,  installation,  materials  or  
workmanship  or  otherwise  are  hereby  expressly  excluded  (to  the extent to which they may be excluded by law). 

PLEASE SEE SAFETYLINK PTY LTD FULL STANDARD TERMS OF CONDITIONS OF SALE FOR FURTHER REFERENCE.

Содержание TempLink 5000









Отзывы: