Return to Table of Contents
Ref: FROGLINE_Surface_Mounted_Standing_Seam_Handbook
Page 3 of 16
Doc ID: MKT-383 Version: 13.0
WARNINGS
READ CAREFULLY
SOMEONE’S LIFE DEPENDS ON IT
-
The building or structure for the anchorages should be assessed by an engineer, unless it is clear to a
competent height safety installer that the structure is adequate.
-
SafetyLink Height Safety Systems must only be installed as per our installation guides, to structures as
specified in the installation manual for each product.
-
All safety procedures must comply in accordance with the current safety code(s) of practice(s) for working
at heights. Ensure safety at all times by being attached to suitable anchor points and approved safety
equipment or approved scaffolding.
-
Installation is to be carried out by, or under the supervision of a competent height safety installer.
-
To prevent galling of non-permanent or adjustable stainless-steel components use nickel anti-seize or
similar boundary layer lubricant.
-
Recommended waterproofing for roof tiles:
Sika Flex Co-Polymer Sealant
.
-
Recommended waterproofing for metal roof: Silicone Sealant Neutral Cure.
-
Recommended chemical anchor: Fischer FIS-V as per Fischer Product Supplement Data sheets.
-
A personal energy absorber or a fall-arrest device with a personal energy absorber must be used in
conjunction with all SafetyLink Anchorages and Lifeline systems.
-
Install SafetyLink horizontal lifeline systems on roof pitches no greater than 15 degrees and across roof
pitches no greater than 25 degrees.
WARNING: SURFACE MOUNTED ANCHOR SYSTEMS INSTALLED ON CONCEALED FIX ROOF TYPES MAY REQUIRE
ADDITIONAL ROOF FIXINGS, PLEASE CHECK INDIVIDUAL ROOF SHEET TYPE INSTALLATION MANUALS.
MAXIMUM NUMBER OF USERS PER SYSTEM IS FOUR (4).
MAXIMUM NUMBER OF USERS PER SPAN IS TWO (2).
REFER TO SYSTEM INFORMATION FOR SITE SPECIFIC USE.
