Page 36
PRODUCT MANUAL
Enduro Pro : SB-EGL200
www.SafetyBasement.com Phone: 877-345-2336 Fax: 888-236-2524
POLL BUTTON COMMANDS
Reboot
DO NOT USE - Please contact SafetyBasement if you need assis-
tance with your Enduro
Batt
This command will force your Enduro to report the current bat-
tery status. Battery status is usually reported each hour.
motionOFF
Turns the Motion Activation OFF. Your Enduro will report con-
tinuously.
motionOnrpt1hr
Turns Motion Acitvation ON. Enduro reports position every
hour even when not in motion. *DEFAULT SETTING.
motionOnnorpt
Motion Activation is ON. Your Enduro will only report when in
motion. This is the optimal battery life setting.
rptRealTime
Send to get the location of the Enduro updated immediately. Use
one time then wait for response on SafariGPS.com
rpt10sec...1hr
Choose the reporting schedule you want to use with the Enduro.
This will report every time interval, regardless of movement.
Shorter times will give more accurate reporting. Longer times
will give longer battery life.
The default time for best battery life and effective reporting has
been set at 2 min.
speedOFF
Do not use speed reporting. Do not send an alert.
speed55mph...
Send an alert when speed is over X MPH. The options are 55, 70
and 100 mph
A new command will replace the command currently in your Enduro.
Please ask us if you are not sure about the best setting for your particular needs.
NOTE: Very frequent updates will provide the most accurate data, but will also use more
battery power. You can keep your Enduro powered in these cases by using an optional
hardwire kit, or extended battery kit. Please contact us about these kits.