44
43
Tighten Top Anchorage
Strap (Tether)
Push firmly on the back of
the seat and tighten top
anchorage strap (tether).
NOTE:
If you are not using
the top anchorage strap
(tether), secure anchorage
strap’s hook to storage
location on kickstand.
5.
6.
Check Belt Tightness
Grasp the child restraint at
the belt path with one hand.
Push and pull the child
restraint from side to side,
forward and back. The child
restraint should not move
more than 1 in. (2.5 cm).
NOTE:
If it moves more
than 1 in. (2.5 cm), try
reinstalling the child
restraint or try another
seating location.
7.
Secure Child in the
Restraint
F-1
Preparing Belt-Positioning
Booster
40-100 lbs (18.1-45.4 kg) and 43-52 in. (110.1-132.1 cm)
and at least 4 Years Old. Belt-positioning booster
using only vehicle lap/shoulder belt.
Lap/Shoulder Belt
Use only the vehicle’s lap and shoulder belt
system when restraining the child in this
booster seat.
Do not use the LATCH belt or top anchorage
strap (tether) when using as a belt-positioning
booster.
Store both LATCH and top anchorage strap.
Do not use the harness system when using as
a belt-positioning booster.
Failure to follow these warnings can result in
serious injury or death.
You
MUST
remove the
harness system (see
section C-5) to use this
seat as a belt-positioning
booster.
F. Installing Belt-Positioning Booster