E. Installing Forward-Facing
40
39
1.
Place Child Restraint in
the Back Seat
Forward Facing
Place child restraint
flush
against the vehicle seat
back
forward facing
.
Kickstand
MUST
be folded
out in order to use this
seat.
Hook LATCH to
Vehicle Anchor
Fasten one LATCH belt hook to
the anchor in the vehicle seat
bight. Repeat for other side of
child restraint.
2.
Installation Tip:
Loosely attach the tether
hook before attaching
the LATCH belt. Consult
vehicle’s owner manual
for specific location.
Tighten LATCH Belt
Push down firmly while pulling
up on the LATCH belt to
tighten belt.
3.
Tighten Top
Anchorage Strap
Push firmly on the back of
the seat and tighten top
anchorage strap.
4.
Check Vehicle Belt
Tightness
Grasp the child restraint at
the belt path with one hand.
Push and pull the child
restraint from side to side,
forward and back. The child
restraint should not move
more than 1 in (2.5 cm).
NOTE:
If it moves more
than 1 in (2.5 cm), try
reinstalling the child
restraint or try another
seating location.
5.
To Remove LATCH Belt
From Vehicle Anchor
Press down firmly on adjuster
side of child restraint and
press release button to
release tension. Unhook
LATCH from bar by squeezing
spring lever and twist hook.
6.
Secure Child in the
Restraint
Do not use this seat with the kickstand folded
in.
