45
7
Remove Shoulder
Belt Positioning Clip
from Storage Location
Turn backed car seat over &
rotate plastic plate to remove
clip from bottom of base.
To store clip
, roll & flatten
strap. Fit strap and clip into
opening in shell as shown.
Rotate plastic plate. It will click
when locked into place.
Thread Belt
Positioning Clip Strap
Through Buckle Slots
in Shell
From the bottom of the
backless booster, feed the
loop end of the strap up
through the bottom buckle slot
in the shell
only
.
From the top of the seat, lift
the front of the seat pad and
feed the loop end of the strap
down through the middle slot.
From the bottom of the
backless booster, thread the
belt-positioning clip through
loop end of strap.
Pull strap tight, as shown.
Reverse steps to remove the
belt-positioning clip.
8
