
sewn
end
12
11
5.
Fully Loosen Harness
Strap
Push down on harness release lever
(through opening on front of seat
pad) while pulling out on harness
straps as shown.
6.
From Back of Seat,
Remove Harness
Strap Loops From
Splitter Plate
7.
Pull Harness Strap Out of
Shoulder Harness Slots
8.
Rethread Harness Strap
Into Correct Shoulder
Harness Slots For Your
Child
WARNINGS:
Make sure that the harness height is
correct for your child’s size.
Do not use this child restraint rear facing unless
the top of your child’s head is at least 1 in. (2.5
cm) below the top of the child restraint.
Failure to follow these steps can result in serious injury or
death.
9.
Attach 2nd Harness Strap
Loops to Splitter Plate
Sewn ends of the harness strap
loops
MUST
face towards you.
DO NOT
twist harness strap or
harness adjustment strap.
Make sure the
same
harness strap
loops are fitted
COMPLETELY ON
both sides of the splitter plate.