9
10
Harness System Adjustments for
Smaller Infants
sewn
end
4.
Replace Pad and
Check Buckle
Pull up on buckle to make sure it
is secured.
The buckle
MUST
not pull out.
2.
From Bottom of Seat,
Pull Metal Retainer
Towards You and Push
It Up into 2nd Slot As
Shown
3.
From Top of Seat,
Lift Pad Up and Lay
the Metal Retainer Flat
Against the Shell As
Shown
1.
With Buckle in the
1st Slot As Shown,
Turn the Seat Over
If you need to move the buckle to
the 1st slot, see pages 6-7.
continued on next page
WARNINGS:
Make sure that the harness height is
correct for your child’s size.
Do not use this child restraint rear facing unless
the top of your child’s head is at least 1 in. (2.5
cm) below the top of the child restraint.
Failure to follow these steps can result in serious injury or
death.
5.
Attach 1st Harness Strap
Loops to Splitter Plate
Sewn ends of the harness strap
loops
MUST
face towards you.
DO NOT
twist harness strap or
harness adjustment strap.
Make sure the
same
harness strap
loops are fitted
COMPLETELY ON
both sides of the splitter plate.
