46
Lower Anchor Belt Installation
1.
Remove Lower Anchor
Belt from Storage
Location
Remove it from the rear-facing
belt path so both hooks are on the
same side of the seat.
WARNINGS:
Do not use the lower anchor belt along
with the vehicle lap or lap/shoulder belt.
Check the lower anchor belt before each use. Use only if
the belt can be tightened properly and securely.
Do not fasten multiple lower anchor hooks on the same
lower anchor bar in the vehicle.
Failure to follow these warnings can result in serious
injury or death.
continued on next page
45
2.
Route Lower Anchor
Belt Through Forward-
Facing Belt Path
Do not twist belt.
The lower anchor belt adjuster can
be on either side.
3.
Finished Lower Anchor
Belt Routing
4.
Place Child Restraint
Forward Facing Flush
Against Vehicle Seat
Back
Put the child restraint into position
1
.
NOTE:
Do not use any recline
positions except to make the child
restraint flush against the vehicle
seat back.
Vehicle seat back must be upright.
5.
Loosely Attach Tether
Hook to Vehicle’s
Tether Anchor
Check vehicle owner’s manual for
specific location.
