![Safety 1st Grow and Go Extend N Ride Скачать руководство пользователя страница 30](http://html1.mh-extra.com/html/safety-1st/grow-and-go-extend-n-ride/grow-and-go-extend-n-ride_manual_3402643030.webp)
Your vehicle’s features may be considerably different
than those pictured here.
The lower anchors of
LATCH
(
L
ower
A
nchors and
T
ethers for
CH
ildren) is a universal system for installing car seats
without using vehicle seat belts. The LATCH: lower anchor
belt can
ONLY
be used in vehicles that have the lower
anchor bars installed in designated seating positions. Most
vehicles manufactured after September 2002 are equipped
with LATCH: lower anchor bars. Check your vehicle owner’s
manual to see which seating positions may be equipped with
LATCH: lower anchor bars.
Lower Anchor Belt
Storage Location
Lower Anchor
Belt Parts
Hooks
Adjuster
To Store Lower Anchor Belt
The lower anchor belt
MUST
be properly stored in its
storage location when:
• using the vehicle belts to install the car seat;
OR
• using the
Booster Seat Mode
;
OR
• the car seat is not installed in a vehicle.
Secure the hooks to the attachments in the storage location
as shown. Gently tighten the belt to remove slack.
LATCH: Lower Anchor Belt
53
54
To Remove Lower Anchor Belt from
Storage Location on Car Seat
Squeeze the spring lever on the hooks and remove the hooks
from the attachments in the storage location.
To Remove Lower Anchor Belt from
Vehicle’s Lower Anchor Bars
1.
Remove the tension from the belt by pushing down on the
side of the car seat with the adjuster.
2.
Then press the adjuster’s button to loosen the belt.
3.
Squeeze the spring lever on the hooks, push the hooks
back into the vehicle seat, and rotate the hooks to the side.
4.
Pull the hooks out of the vehicle seat.
DO NOT
use both the lower anchor belt and vehicle belt at the same time.
WARNING: