C. Basic Use
27
28
Thread Harness Strap
OVER Metal Bar
c.
Attach Harness Strap to
Splitter Plate
From the bottom of the child
restraint, fit the harness
strap loops onto the splitter
plate.
Harness strap loop ends
MUST go through the
recline stand as shown.
The sewn ends of the
harness strap loops MUST
face towards you. DO
NOT twist harness straps
or harness adjustment
strap and make sure the
harness strap loops are COMPLETELY ON the splitter
plate.
C-9
Accessories (on select models)
Install Cup Holder
(on select models)
Pull pad off corner. Hook
bottom of cup holder to edge
of shell.
Rotate cup holder up until it
snaps into the hole on the
shell.
Replace pad.
3.
Failure to place the harness
adjustment strap between
shell and the harness straps
as shown can result in
serious injury or death.
Harness MUST be threaded
over the metal bar.
Harness system must be reattached correctly.
Failure to follow these warnings can result in
serious injury or death.
