Follow the manufacturer’s instructions at all times. Before removal, ensure you have
carefully noted the way which the various parts are attached to the seat so as to facilitate
reassembly.
Your child car seat is equipped with a buckle designed to give your child
maximum protection during proper use. When working properly, your buckle
should always fasten with an audible “click”.
If sticky liquids such as baby food, fruit juice, etc, get into the buckle it may
become sluggish and you will not hear a “click”.
The buckle should be cleaned by following the steps below.
1. Fold seat cover and foam back from buckle, using a flat edged screwdriver
gently lift one end of rod out releasing crotch buckle.(repeat for other side)
2. As illustrated in Fig 34 place the buckle unit under running water (40 degrees celcius)
Let the water flow through the mouth of the buckle for one minute
3. Simultaneously latch and unlatch the tongues into the buckle several times until
a strong audible click is heard. Refer to Fig 35.
4. If you still cannot hear a strong audible click after latching the buckle several
times. repeat steps 2 and 3.
5. DO NOT oil any part of the buckle.
6. Allow buckle to dry.
7. Refit crotch buckle ensuring RED button is facing out.
8. Thread the webbings as shown with arrows in Fig 36.
9. Put the 2 metal rods back into the webbing loops and push into the slots.
10. Pull the buckle to make sure that it is fitted properly.
11. If the buckle does not return to original working order, contact Dorel Australia
Customer Service on 1300 809 526
CLEANING INSTRUCTIONS FOR BUCKLE
Fig 34.
Fig 35.
Fig 36.
push metal rod
into slot
18
Содержание CCA 2010 A
Страница 15: ...CORRECT FORWARD FACING VEHICLE POSITION Fig 28 Fig 27 Fig 26 CORRECT USE CORRECT USE INCORRECT USE 14...
Страница 22: ...21 NOTE...
Страница 23: ...22 NOTE...
