To Remove Lower Anchor Belt
from Vehicle’s Lower Anchor Bars
1.
Remove the tension from the belt by
pushing down on the side of the base
with the adjuster.
2.
Press the adjuster’s button to loosen
the belt.
3.
Squeeze the spring lever on the
hooks, push the hooks back into the
vehicle seat, and rotate the hooks to
the side.
4.
Pull the hooks off of the vehicle’s
lower anchor bars.
Your vehicle’s features may be considerably different
than those pictured here.
The lower anchors of
LATCH
(
L
ower
A
nchors and
T
ethers for
CH
ildren) is a universal system for installing car seats without using
vehicle seat belts. The LATCH: lower anchor belt can
ONLY
be used
in vehicles that have the lower anchor bars installed in designated
seating positions. Most vehicles manufactured after September 2002
are equipped with LATCH: lower anchor bars. Check your vehicle
owner’s manual to see which seating positions may be equipped with
LATCH: lower anchor bars.
Lower Anchor Belt
Storage Location
Lower Anchor
Belt Parts
Hooks
Adjuster
To Store Lower Anchor Belt
The lower anchor belt
MUST
be properly
stored in its storage location when:
• using the vehicle belts to install the
base;
OR
• the base is not installed in a vehicle.
Gather the lower anchor belt and place it
into the storage location as shown.
LATCH: Lower Anchor Belt
45
46
To Remove Lower Anchor Belt from
Storage Location in Base
Pull LATCH: Lower Anchor Belt out of storage location in base.
DO NOT
use both the lower anchor belt and vehicle belt
at the same time.
WARNING: