Safety 1st advance 70 air plus, Инструкция по эксплуатации, Страница: 33 / 36

Place Child Restraint
in Vehicle
Forward-Facing
Place child restraint flush
against the back of the
vehicle seat
forward-facing
in the back seat.
2.
Thread Vehicle Belt
Thread the vehicle lap or lap/
shoulder belt combination
through the forward-facing
belt slot and out the other
side. Buckle vehicle belt.
3.
Installation Tip:
Loosely attach
the tether hook
before threading
the vehicle belt.
Consult vehicle’s
owner manual for
specific location.
Tighten Vehicle Belt
Push down firmly on the
child restraint and pull on
the shoulder belt or lap belt
adjuster to tighten.
It maybe easier to tighten
the belt through the belt path
opening as shown.
With a switchable retractor,
pull the shoulder belt all
the way out to switch the
retractor into the ALR mode
before tightening. Feed the
slack back into the retractor
while tightening.
4.
Tighten Top
Anchorage Strap
Push firmly on the back of
the seat and tighten top
anchorage strap.
5.
NOTE: If you are not using
the top anchorage strap
(tether), attach the hook
to the base as shown.
Tighten tether to remove
the slack.