Safety 1st advance 70 air plus, Инструкция по эксплуатации, Страница: 26 / 36

Hook LATCH to Vehicle
LATCH Anchor
Fasten one LATCH belt hook
to the anchor in the vehicle
seat located in the vehicle
seat bight. Repeat for other
side of child restraint.
2.
Tighten LATCH Belt
Push down firmly on the child
restraint and pull up on the
free end of belt to tighten.
3.
It maybe easier to tighten
the belt through the belt
path opening as shown.
4.
Check Belt Tightness
Grasp the child restraint at
the belt path with one hand.
Push and pull the child
restraint from side to side,
forward and back. The child
restraint should not move
more than 1 inch.
NOTE: If it moves more than
an inch, try reinstalling the
child restraint or try another
seating location.
Secure your child in the
child restraint. Recheck
the recline angle to make
sure it is reclined according
to your child’s weight.
Repeat steps if not reclined
correctly.
To Remove LATCH Belt
From Vehicle Anchor
Remove child from child
restraint. Press down
firmly on adjuster side of
child restraint and press
release button to release
tension. Unhook LATCH
from bar by squeezing
spring lever and twist
hook.
5.