www.safescan.com
23
5.6.2 CALIBRATE THE WEIGHING SYSTEM
Press
and select ‘set device’ with
the
buttons.
Place a 500 gr weight on the platform.
The display will show “sampling” while
the 6185 is being calibrated.
Remove the 500 gr weight from the
platform.
The 6185 will switch to weighing scale
mode, showing the current weight on
the platform.
The Safescan 6185 will go back to
counting mode
The display will show “finished” to
indicate that the calibration procedure
has ended
Press
to confirm. Select “set cal”
with the
buttons..
Press
to confirm. The display will show “taring” and afterwards asks to place a 500 gram weight on the platform.
2
1
4
7
5
8
6
3
The Safescan 6185 has a continuous automatic calibration system, whereby calibration by the user should not be required. However, it is
possible to re-calibrate the 6185 should this be necessary.
The Set region function should only be used when the 6185 is moved to a country in a different region.
5.6.1 SET REGION
Press
and select ‘set device’ with
the
buttons.
Select the desired region with the
buttons. Press
to
confirm.
The 6185 will go back to counting
mode.
Press
to confirm. “set region” is
shown on the display.
Press
to confirm. The device will
show the current regional setting.
2
1
4
5
3
5.6 SET DEVICE
The Set region function should only be used when the 6185 is moved to a country in a different region.
