www.safescan.com
22
5.5 CLEAR ALL COUNTS
5.4 BACK TO DEFAULT SETTINGS
Press
and select ‘Clear all counts’
with the
buttons.
Press
and select ‘default’ with the
buttons.
The 6185 will go back to counting
mode.
The 6185 will restart in first-time use
mode. See chapter 1 and 2 on how to
set up your 6185.
Press
to confirm. “Clear all” will
start blinking.
Press
to confirm. The display will
show “RESET ALL”.
Press
to confirm. The device will
clear all data. The display will show
“Cleared” when finished.
Press
to confirm. The device will
delete all data and user-calibrated items
and go back to factory settings. You will
see a counter running back to zero on
the right bottom side of the display.
2
2
1
1
4
4
3
3
This function clears alll count data in the memory. The user-calibrated counting items will not be deleted.
This function resets the 6185 back to its default factory settings. All user-calibrated counting items will be deleted.
