More info, articles, tutorials and videos at:
support.safescan.com
6
First operation
1.
The Safescan 2265 starts by default with the following settings:
A.
Currency:
EUR
B.
Counting mode:
MIX
C.
Auto start:
ON
START
OK
CLR
START
OK
CLR
ADD
MODE
BATCH
DETECT
English
3.
When the device detects a suspect banknote during counting, it will stop, sound an alarm and display an error
message. The last counted banknote in the stacker is the suspect note. Remove this note and press [
Start/OK
]
to continue counting.
2.
Set the banknote hopper guide so that the sides of the banknotes are enclosed and therefore the banknotes are
centered. Organise your banknotes in a neat stack, make sure the back of the stack is aligned straight and the notes
are centered.
First, place the stack of banknotes facing forward
on the hopper (1).
1
2
Not following these steps may result in counting errors.
When an error message has occurred, it is recommended to re-count the complete stack of banknotes to
verify the counting result.
Then, flip back the stack to start counting (2).
Note:
to switch to GBP currency, press
[
DETECT
].
