Safescan 1450, Руководство пользователя, Страница: 13 / 16

www.safescan.com
13
This indicates that the transport assembly needs to be replaced. The assembly can be ordered as sparepart
from Safescan.
To change the transport assembly: Switch off the machine, open the machine as described in chapter
“Removing the transport assembly”. Press the transport assembly down, then rotate the transport assembly to
the middle position inbetween [ 1 ] and [ 2 ].
Remove the used assembly. Mount the new transport assembly in position [ 1 ]. Reset the total coin count to
zero after replacing the transport assembly by holding
[
REPORT
]
and [ - ] key and switching on the machine until
the following message is displayed. Press the [ CLEAR ] button to reset the total coin count to 0.
CLEAR CLEAR
SETTINGS
REPORT
CLEAR
PRINT
+
-
CHANGING THE FUSE
The device is protected by a fuse, which can be easily replaced when required.
Please turn off the machine before removing the fuse and unplug the power cord from the unit.
Otherwise there is a risk of life due to electrical shock.
Remove the fuse cover and replace the fuse with an equivalent fuse. The lock of the fuse must be firmly
pressed again after changing.
CLEAR CLEAR
ENGLISH
+ +
Included
Safescan MCS
software cable PC (Windows operating
system) with MCS installed
USE IN COMBINATION WITH SAFESCAN MONEY COUNTING SOFTWARE
The Safescan 1450 can be used in combination with the Safescan Money Counting Software. Visit: www.
safescan.com/downloads . This enables you to export your counting results and serial number information
to the PC for further processing.