Safescan 1450, Руководство пользователя, Страница: 11 / 16

www.safescan.com
11
CLEANING THE COIN TRANSPORT AREA AND SENSORS
Clean the coin sorting area, the transport assembly (including the black outer soft plastic ring) and sensors
with the cleaning brush. Excess dust can best be removed with compressed air (available in a spray can for
example). Before cleaning the sensors, remove the coin cups. Clean the sensors located inside the sorting
holes. In addition, the transport rail should also be cleaned.
1. Clean the transport assembly
with cleaning brush
and/or compressed air
2. Clean the coin transport area
Coin compartment
Counting sensors
Sorting holes
3. Counting sensors on the
two sides of each sorting hole
After cleaning, mount the transport assembly back to its original position (1 or 2). To do so, gently push and
slide the assembly in its position. Place the cover back on the device and slide the safety-lock switch on the
back to the ‘locked’ position. Place the coin cups back.
Connect the device to the mains outlet and switch it on.
ENGLISH