Installation manual
Vik Veg H2
4
4.3 Installing the profiles
The guardrail profiles (a-profile) and the W-shaped backside beam have one wide and one narrow end.
The narrow end of the a-profile is marked with a small (8mm) hole.
When connecting the profiles:
A-profile: the wide end of the profile is placed outside the narrow end of the following barrier
W-shaped backside beam: the narrow end of the profile is placed outside the wide end of the
following beam
in the direction of traffic.
4.4 After installation
When the guardrail is installed and adjusted, the holes around the post should be fully refilled.
5.
Maintenance
There are no general inspections intervals for this guardrail itself. Inspections intervals have to be
determent based on local factors such as volume of traffic, risk of damage, climate etc.
The guard rail should be inspected regularly and if displaced or damage, it should be adjusted and
repaired.
All damage profiles should be replaced with new when repaired.
5.1 Cleaning
Cleaning can be done with water and any type of Ph neutral detergent.
