Page 17
0403
3.
MAINTENANCE INSTRUCTIONS AND STORAGE
Any broken components of SafeRail ladders and Vertical SafeRail-safety rails must be replaced with new
ones. No modifications or additions may be made to the SafeRail-fall arrest system, and its components may
not be replaced with any other parts than those approved by the manufacturer.
3.1
SAFERAIL CARRIAGE-SAFETY CARRIAGE
•
The SafeRail Carriage-safety carriage is made from stainless steel and plastic, and it is almost
maintenance-free. The SafeRail Carriage-safety carriage is not susceptible to weather conditions or
corrosion.
•
The SafeRail Carriage-safety carriage does not require lubrication or oil. It is advisable to dry off the
SafeRail Carriage-safety carriage after use if it has become wet. While drying, avoid subjecting the
SafeRail Carriage-safety carriage to direct heat. It is also advisable to clean the SafeRail Carriage-
safety carriage as necessary to ensure that it is comfortable to use, and the safety markings remain
clearly legible. Where necessary, cleaning agents suitable for stainless steel may be used to clean
the carriage. When cleaning the carriage, follow the cleaning methods specified above closely.
•
The SafeRail Carriage-safety carriage must be stored such that it is protected from weather
conditions and dirt.
•
It is forbidden to do any changes, additions or repairs to the SafeRail Carriage-safety carriage.
3.2
SAFERAIL LADDERS AND VERTICAL SAFERAIL -SAFETY RAIL S
SafeRail ladders and Vertical SafeRail-safety rails retain their functionality without any special maintenance
or cleaning. Neither do special requirements exist for their storage.
If SafeRail ladders and Vertical SafeRail-safety rails are installed in a location that is highly susceptible to
corrosion (such as above a swimming pool), specific monitoring measurements must be carried out.
4.
TYPE APPROVAL AND QUALITY ASSURANCE
The SafeRail-fall arrest system (Vertical SafeRail-safety rail MM 101, SafeRail Carriage-safety carriage MM
401, SafeRail Joint-extension piece MM 201, Unlocking Carriage Stopper-carriage barrier MM 312,
Unlocking Carriage Stopper-carriage barrier MM 311, and Carriage Stopper-carriage barrier MM 313) has
been tested in accordance with the EN 353-1:2014 + A1:2017 standard, and it meets the requirements of
Regulation (EU) 2016/425 of the European Parliament and of the Council on personal protective equipment.
Finnish Institute of Occupational Health, Topeliuksenkatu 41 B, FI-00250 Helsinki, notified body no. 0403,
has issued a type approval certificate.
Finnish Institute of Occupational Health (TTL) monitors that the quality of production is uniform.
5.
SIGNS AND MARKINGS
Each SafeRail Carriage-safety carriage, as well as the SafeRail ladders and/or the Vertical SafeRail-safety
rails, are equipped with markings that inform about the safe use of the fall arrest system and the safety
carriage and provide essential information regarding the products.
Содержание MM 111
Страница 1: ...INSTALLATION MANUAL...
