SAFERAIL MM 111, Руководство по установке

Страница: 10 / 22

Page 9
7. USE AND INSTALLATION OF UNLOCKING CARRIAGE STOPPER -CARRIAGE
BARRIER MM 311
The unlocking Carriage Stopper-carriage barrier MM 311 is installed at the bottom of a
SafeRail ladder or Vertical SafeRail-safety rail. It prevents the SafeRail Carriage-safety
carriage from coming off the safety rail accidentally when descending back to ground
level/starting plane.
7.1 INSTALLATION OF THE UNLOCKING CARRIAGE STOPPER -CARRIAGE BARRIER
MM 311
1. Slide the Carriage Stopper-carriage barrier MM 311 on to the safety rail such that it is placed against
the back of the safety rail and the latch of the stopper opens up on to the right side.
2. The Carriage Stopper-carriage barrier MM 311 must be installed such that the bottom screw
connects with the locking notch at the bottom of the safety rail. Tension the screws: first the bottom
one, then the locking screw on the left side of the safety rail. When tensioning the locking screw,
ensure that the groove of the safety rail remains at a width of 15 mm. Note that the locking screw
can be tensioned to ~10 Nm before it affects the width of the groove of the safety rail.
Carriage Stopper-carriage barrier MM 311
Carriage Guide-carriage guide MM 301