SAFERA Smart R Stove Guard, Руководство по установке

Страница: 14 / 14

14
4. InstallInG thE WatEr lEaKaGE sEnsor
(optional)
stove Guard can be equipped with max.
four saFEra Water leakage sensors. the
sensors are placed in the typical leakage
areas, e.g. under the dishwasher or sink.
attach the sensors
Ⓕ
in place.
attach the plug
Ⓖ
of the leakage
sensor to the Power Control unit
Ⓗ
.
If there is an extra sensor, its plug
Ⓖ
is connected to the connector
Ⓘ
of
the previous sensor.
Check the operation of the furthest
sensor
Ⓕ
by placing a damp paper
towel against it for 15 seconds. When
the water is detected, the Central unit
Ⓐ
gives a sound signal and the warning light
for water leakage
❼
is blinking.
reset the leakage alarm by pressing
the oK button
❷
. Clean and dry the
sensor.
1
2
3
4
5
ѧ HINT
If the sensor is left wet, the appliance will
give another alarm in an hour after sign-
ing off the previous one.
C
G
H
I
F