SafeMi SHCS-10, Руководство пользователя

Страница: 7 / 68

CARBON MONOXIDE Alarm
A loud audible alarm alerts you to potentially lethal levels of carbon monoxide. You should
immediately check the residents for carbon monoxide poisoning symptoms.
The carbon monoxide alarm signal pattern is a repeating cycle of 4 short beeps followed by 5
seconds of silence. It is accompanied by synchronized blinking of the red LED (ALARM). The
alarm sound initially becomes quieter for about 10 seconds and then reverts to its normal
alarm volume of 85 dB.
If carbon monoxide is detected:

Stay calm, open doors and windows for ventilation. Stop using appliances that burn any
fuel, turn them off if possible.

Leave the building leaving the doors and windows open.

Call the gas or the appropriate services. Do not use devices and installations again until
they have been checked by a specialist.

If anyone has symptoms of carbon monoxide poisoning, get medical attention
immediately and report suspected carbon monoxide poisoning.

Depending on the level of carbon monoxide detected, it may take up to 10 minutes for
the sensor to purge for alarm to go off. Do not enter the room until the alarm goes off.
WARNING: Do not ignore any alarm. If there are doubts as to the cause of the alarm, it
should be assumed that it is a fire. The smoke alarm has priority when both smoke and
carbon monoxide are present in the room.
TIPS FOR TROUBLESHOOTING
The device does not beep when pressing TEST / SILENCE.

Make sure the machine is turned on. Fix the device on the mounting plate and turn it
clockwise until it fits snugly on the plate.

The unit is in the "Smoke Alarm Mute", "Low Battery Warning Mute", or "Fault Warning"
mode. Make sure the device is in "normal operation" mode and then test the device.

Clean the device. Please see chapter OPERATING THE MACHINE - Maintenance.

If the malfunctions still occur during the warranty period, you can return it to your dealer.