Safeline TTR, Руководство по установке, Страница: 23 / 32

23
© 2012 SafeLine and all the SafeLine products and accessories are copyrighted by law.
Programming
ENGLISH v.1.01
diSTreSS meSSaGe code daTa commenTS
Record distress message played
in the lift car.
*51* ”Speak” # This message will be played in the lift cabin when the emergency lift
telephone starts calling the alarm centre. Make sure that there is no noice
in the background when recording the message.
example of message:
Please do not panic, the emergency telephone is
now calling the emergency call centre.
Record alarm message from Lift
Car to alarm central
*52* ”Speak” # This message will be played to the alarm receiver and in the car when the
call is answered. Make sure that there is no noice in the background when
recording the message.
example of message:
This is an alarm from the lift on 5th avenue.
To hear the quality of the message, press “1”. To terminate the call press
“#”.
Record alarm message from car
top to alarm central
*53* ”Speak” #
Record alarm message from Lift
pit to alarm central
*54* ”Speak” #
Options for the recorded distress
message
*61* - # 0 = Disable recorded message.
1 = Enables recorded message.
*61* # Play the the recorded message.
Options for the recorded message
from lift car
*62* - # 0 = Disable recorded message.
1 = Enables recorded message.
*62* # Play the the recorded message.
Options for the recorded message
from top of car
*63* - # 0 = Disable recorded message.
1 = Enables recorded message.
*63* # Play the the recorded message.
Options for the recorded message
from lift pit
*64* - # 0 = Disable recorded message.
1 = Enables recorded message.
*64* # Play the the recorded message.
oTher codeS code daTa commenTS
Buzzer *71* - # The buzzer will sound at incoming call or at intercom use.
1 = On (Default)
0 = Off
Ring-tone timeout *72* - - # Number of ring signals before dialling the next number. (Default = 8)
Hot Line *75* - # Phone connects directly to a fixed receipient without dialling a phone
number
0 = Standard phone line (Default)
1 = Hotline
Maximum communication time *79* - # 1 - 20 minutes. (Default = 8 min)
Reset active alarm *80* - # 0 = OFF,
1 = ON (Default)
Auto answer *81* - - # No of signals before SafeLine answers incoming call.
Can be set from 00-16. 00 = Never answering. (Default = 02)
Unit number *82* - # Program Unit number [0-9], when units share phone line.
Detect dial tone *83* - # 0 = Off
1 = On (Default)
Set to off if SafeLine has problem to detect the dial tone.
Receipt to alarm receiver *84* - # Select which message(s) to send to the alarm receiver at an alarm call.
0 = None (Default)
1 = Start of alarm
2 = Start+end of alarm