13
© 2012 SafeLine and all the SafeLine products and accessories are copyrighted by law.
6E
Installation
ENGLISH v.1.01
acTiVaTinG The Sim card
Before you can start using a new Sim card, the card has to be prepared and support 2G network.
cards that only support 3G will not function.
The SafeLine TTR can only recognize the PIN code if the code is set to “1234”, “0000”, “1111”. In some
cases the code can also be deactivated. If the PIN code is set to “1234”, “0000” or if it is deactivated the
SIM card can be moved from the SafeLine TTR to any of SafeLine GSM products.
If the Pin code is set to “1111” the SIM cards code will be randomly changed by the SafeLine GSM unit
and memorized. This way the SIM card can only work with the SafeLine GSM unit unless you use the PUK
code for setting up a new PIN code.
The randomly chosen PIN code is memorized by the unit. If you want to upload a new SIM card with PIN
code “1111” you will need to fi rst upload a SIM card with PIN code “1234” or “0000” this to clear the old
code in memory.
Pin code (set to “1234”, “0000” or deactivate).
1.
Insert the SIM card in an ordinary cellular phone. In the “Security settings” menu, change the PIN
code to “1234”. If this is not possible , set the PIN code to “0000” or set the ”PIN code request”
option to “OFF”. (Might not always function)
2.
Verify the PIN code by switching your phone off and on again.
3.
Make a call from your phone to verify that the SIM card is active, before you move it to the SafeLine
TTR.
4.
Also make a call to SafeLine TTR after insertion to check that it is possible to get a proper connection.
noTe!
If you enter the wrong PIN code 3 times, the SIM card will be blocked (requires PUK code to
unblock). The SafeLine TTR can not be started and the LED (3) will turn red.