9
SLCC v.4.01 EN
Step 4
Configuring the serial ports
Select the [Options] item from the menu and click [Settings].
Click the [Communication] tab.
Settings for the PSTN modem:
• Check the [Enabled] box below the header “Telephone
modem”.
• Select the desired COM port.
• [Answer after 2 rings]: specify how many times the phone
should ring (between 1 and 16) before SLCC answers the call.
• [CPC Protocol]: check this box if the lift telephone uses the
CPC alarm protocol (this is an option to SLCC)
Settings for the GSM modem:
• Check the [Enabled] box below the header “GSM modem”.
• Select the desired COM port
• [Baud rate]: set the desired transmission speed for the modem.
• [PIN code]: enter the PIN code, if required. Settings both for
PSTN and the GSM modem:
• Follow all instructions on this page.
Settings both for PSTN and the GSM modem:
• Follow all instructions on this page.
