10
SL2 v. 2.01 EN
Installation
1. Start configuration:
2. 1
st
phone number:
3. 2
nd
phone number:
4. Call type 1
st
number:
5. Call type 2
st
number:
6. Alarm button delay:
7. End configuration:
1. Start configuration:
2. Enter P100 ID code:
3. Set test alarm type:
4. Set number of days
between test alarm:
5. LMS phone number:
6. Test alarm:
7. End configuration:
If at any time you need to start over, use the factory reset command
*99*1#
Example 1. Storing of two different telephone numbers, both to
be answered as voice calls. For test facility, see example 2.
Example 2. SLCC and 3 day test. (SLCC – SafeLine Call Centre)
Note! Please refer to the full
configuration setup in the
“Configurations codes table”
as these are merely examples.
Programming
examples -
SafeLine Auto-
dialers Units
