manualshive.com logo in svg
background image

9

© 2010 SafeLine and all the SafeLine products and accessories are copyrighted by law.

Menu

ENGLISH V. 4.02

LED INDICATION

Yellow LED

Light off:

Telephone line OK, call 
terminated

Flashing once every 5 
seconds:

Telephone line 

not

 OK.

Flashing twice every second:

Emergency signal button 
active. 

Yellow steady:

Activated alarm. Remains lit 
until reset.

Green LED

Light off:

Telephone line 

not

 OK.

Flashing once every 5 
seconds:

Unit is OK. Phone line is OK.

Flashing two times every 5 
seconds:

Alarm fi lter activated.

Green steady

:

Call connected.

Continuous fl ashing:

Telephone in confi 

guration 

mode.

System LED

Flashing once every 5 
seconds:

Telephone line OK.

Flashing two times every 5 
seconds:

No telephone connection 
available.

Flashing twice every second:

Calling out

Light steady:

Call connected.

Flashing rapidly:

Incoming call.

Yellow LED “Call in progress“

The Yellow Pictogram LED, is 
lit as soon as the alarm button 
is pressed longer than the set 
delay

Standard (*78*0#)

Strictly EN81-28 (*78*1#)

Green LED “Call connected“

The Green pictogram LED turns 
on as soon as the SafeLine unit 
detects a responding voice. 
The LED is turned off when the 
call is terminated.

Yellow LED

Flashing twice every second:

Emergency signal button 
active. 

Yellow steady:

Activated alarm. Remains lit 
until reset.

Green LED

Green steady

:

Call connected.

System LED

The system LED is located on 
the backside of the unit.

Содержание MX2





















Отзывы: