E I . FCC Compliance Class 8 Digital Device
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communica-
tions. However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interfer-
ence by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
E II FCC Declaration of Conformity
This device complies with FCC standard CFR47 Part 15 subpart and sub-
part – section 15.247. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may
cause undesired operation.
FCC ID:2A
JA2
SFLTPV1A
FCC Warning statements
Per 15.19: THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPER-
ATION IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
E III Industry Canada Statement/Avis d’industrie Canada
This device complies with Industry Canada license exempt RSS stand-
ard(s).Operation is subject to the following two conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any
interference received, including interference that may cause undesired
operation.
Cet appareil est conforme avec les normes de l’Industrie Canada-
sans les standards RSS (s). L’utilisation est soumise aux deux
conditions suivantes: (1) cet appareil ne peut pas provoquer
d’interférences et (2) cet appareil doit accepter toute interférence,
y compris les interférences qui peuvent causer un mauvais
fonctionnement de l’appareil.
FCC ID:2A
JA2
SFLTPV1A
IC:20716-SFLTPV1A
E IV European Community
Declaration of Conformity with Regard to the EU Directive 1999/5/EC
Safelet BV is authorized to apply the CE Mark on Safelet and S
thereby declaring conformity to the essential requirements and other
relevant provisions of Directive 1999/5/EC.
E
Compliance
Information
Compliant with the standard R&TTE 99/CE/05
Conforme à la norme R&TTE 99/CE/05
Declaration of Conformity
Product: Safelet
Model No. Indra
This is declaries that the above-referenced product, to which this declara-
tion relates, is in conformity with the provisions of:
• Council Directive 2014/30/EU on Electromagnetic Compatibility (EMC)
• Council Directive 1999/5/EC on Radio and Telecommunications Termi-
nal Equipment
Conformity is shown by compliance with the applicable requirements of
the following documents :
Reference & Date Title
EN 300 328 V1.8.1 (2012-04) Electromagnetic compatibility and Radio
spectrum Matters
EN 301 489-17 V2.2.1 (2012-09) Electromagnetic compatibility and Radio
spectrum Matters (ERM); Wideband tran-
mission systems; Data transmission equip-
ment operating in the 2,4 GHz ISM band
and using wide band modulation tech-
niques; Harmonized EN covering the
essential requirements of article 3.2 of the
R&TTE Directive (ERM); ElectroMag
netic Compatibility (EMC) standard for
radio equipment; Part 17: Specific condi-
tions for Broadband
Data Transmission Systems
