9
STAR Special Needs
continued
headrest_Installation.ai
A
Headrest
The width and height of the headrest are both adjustable to provide
additional support for the child’s head.
Headrest Installation:
1.
Adjust headrest width if necessary. (See instructions below.)
2.
Orient the STAR Special Needs restraint so the back of the shoulder
harness faces up.
3.
Position the headrest such that the
I
-shaped openings are centered
on the exposed black webbing.
A
4.
Grasp the black webbing and pull it through the first
I
-shaped
opening. Repeat with the second
I
-shaped opening.
B
Headrest Width Adjustment:
1.
Remove the headrest from the STAR Special Needs restraint.
2.
Open the two fabric tabs on the back of the headrest cover.
3.
Detach the vinyl tab from the attach tab.
4.
Detach the elastic strap from the attach tab.
5.
Remove the plastic headrest panel from the headrest cover and
foam.
6.
Select Slot 1 for a wide width headrest or Slot 2 for a narrow
width headrest.
C
7.
Insert the plastic headrest panel into the selected slot.
8.
Reattach the elastic strap to the attach tab.
D
9.
Reattach the vinyl tab using Hole 1 for wide width or Hole 2 for
narrow width.
D
10.
Close the two fabric headrest cover tabs.
11.
Repeat steps 2-10 for the opposite side of the headrest.
Headrest Height Adjustment:
After the STAR Special Needs restraint is installed on the bus seat,
grasp both sides of the headrest and slide it up or down to provide
proper support for the child’s head.
E
Headrest_Down_E.ai
E
B
C
Attach Tab
Slot 1 Slot 2
Elastic Strap
Fabric Tab
Vinyl Tab
D
Elastic
Strap
Hole 2
Hole 1
