7
6
WARNING
OVERLOADING
Webbing restraint systems should not be overloaded, by using mechanical aids such as
levers or bars (cheater bars) unless they are designed for use with the webbing restraint
system.
STABILITY OF LOAD
Care should be taken to ensure that the stability of the load is independent of the
webbing restraint system and that the release of the webbing restraint system will not
cause the load to shift, thus endangering personnel. If necessary, attach more straps for
further support to the load before releasing the tensioning device in order to prevent
accidental falling.
LIMIT OF TWIST
Webbing restraint systems should not be used when knotted, and twisting of the
webbing is prohibited; however, a half turn is allowable to prevent vibration and flapping.
PROTECTION
The webbing restraint system should be protected against friction, abrasion and damage
from loads with sharp edges, use protective sleeves, blankets or corner protectors.
WITHDRAWAL AND REPAIR
Webbing restraint systems should be withdrawn from service and replaced or returned
to the manufacturer for repair if they show the following signs of damage:
(A)
Webbings Tears, cuts, nicks and abrasions in load-bearing fibres and retaining
stitches exceeding 10%, and deformations resulting in exposure to heat.
(B)
End fittings and tensioning devices Deformations, cracks and pronounced signs of
wear or corrosion.
Only the manufacturer should carry out repairs on webbing restraint systems and on the
webbing, any identification labels should be repaired.
EXTENDING THE USEFUL LIFE
The life of lashing webbing and components can be extended by observing the
following:
(A)
Care and maintenance
(i)
Never heat or heat treat the lashing components.
(ii)
Lightly oil the lashing components prior to prolonged storage.
(iii)
Store the lashing webbing and components in a clean dry place.
(iv)
Keep the tie-down as clean as possible and the ratchet free from dirt.
(v)
If contaminated with oil, fuel or acid, remove with hot soapy water.
(vi)
If contaminated with alkali, rinse thoroughly in cold water as soon as possible.
Содержание SLT-600
Страница 1: ...USER GUIDE www safeguardnet com au...
