How to use
8
BASIC OPERATION:
1. Place the base station on a level surface and connect it to a power outlet.
2. Pour ingredients into one of the two cups. Fill the cup with liquid to the max line. Screw the blade
onto the mug and tighten it by hand to ensure a tight seal.
3. Place the cup on the base station with the blade attachment facing down. Ensure that the three
lugs are in the notches below.
4. To initiate the mixing process, press the container down with the blade and turn the container
clockwise until it clicks into place.
5. Avoid running the mixer for more than 1 minute at a time to prevent overheating.
CAUTION:
If the mixer does not grind the ingredients, please check the following points:
• Ensure there is enough water in the container.
• Verify that the size of the fruit or vegetable is not too large.
• For better mixing results, start by mixing nuts and other hard ingredients without liquids first.
Afterward, add liquid to achieve a perfect mixing result.
6. If the desired consistency of the food to be mixed has not yet been reached, wait for 1 minute and
repeat the mixing process up to 3 times in a row until the correct consistency is achieved. If more
than three 1-minute blends are required, allow the blender base to cool for 2-3 minutes before
starting the next blending process.
7. To stop the blending process, simply turn the container in the other direction (counterclockwise)
to disengage the container from the base. Stop applying pressure to the container and wait for the
motor to come to a complete standstill. Never remove the containers from the mixer base before
the engine has completely stopped. Removing the container while the engine is still running can
damage the blade clutch or engine transmission.
8. Unplug the blender from the mains when it is not in use.