Safeaid TS350, Руководство по установке

Страница: 11 / 25

SAFE-AID TS350 WIRED WIND SPEED METER MANUAL - VERSION 1
Page 11
 Reload Firmware
SET DATE & TIME
To change the systems current date and time highlight the Set Date & Time and press the
select button ( Figure 14 ). Select the date or time unit that needs to be changed by pressing
on the relevant value, all units will display a keypad where the required number should be
entered except for the month which will change incrementally on each selection.
Figure 14
CONTINUOUS LOGGING
For any logging of data to take place a USB flash drive (memory stick) must be inserted into
the TS350 display unit i.e. the USB symbol is displayed in the top left corner. The following
pre-set data is then logged to the USB with the TS350 display units date and time stamp:

Over Intermediate Limit

Under Intermediate Limit

Over Upper Limit

Under Upper Limit

Peak Speed

Powerup

WindSpeed Password Entered

System Password Entered

UpperLimit Changed

Intermediate Limit Changed

Units of Measure Changed
There are two methods of logging used on the TS350 display unit:

Continuous Logging – Option 1

Error Logging – Option 2