3
UK
What’s included:
(A) 1 x SAFE EZ-Tool™
(B) 2 x Catch
(C) 2 x Arm
Recommended usage
Use on top drawers or cupboards where the inside of the cabinet above
the drawer is flat. Worktops can overhang the drawer unit by up to 20
mm. If using a drawer insert to tidy cutlery etc. you will need a mini-
mum of 40 mm space between the top of the insert and the top of
the drawer.
Step by step installation guide
Slide the EZ-Tool™ (A) onto the
Catch (B). The broad plate at the
end of the EZ-Tool™ fits into the
recess on the adhesive side of
the Catch.
stop tab
removal tab
back plate
SAFE SecureHold™ adhesive is
instantly strong. It cannot be repo-
sitioned when placedincorrectly so
test each step first,
without
expo-
sing the adhesive. Before installati-
on, clean and dry the surface with a
50:50 solution of water plus white
vinegar or surgical spirit.
Place the EZ-Tool™ and Catch
onto the Arm (C) so that the
locator pin fits into the hole on
the top of the Arm.
Remove the protective layer to
expose the adhesive strip on
the Catch.
Open the drawer and hold
the stop tab of the EZ-Tool™
diagonally against the overhang
of the worktop.
stop tab
