SAFE-RAIN F6324265, Руководство пользователя, Страница: 18 / 25

18
To activate this both middle buttons (“previous” and “next”) of the driver have to be pressed in
the same time for about 3s. To deactivate function the procedure is the same.
The figure on the next page shows how flip function works.
NOTE: The keys on the reverse of the display are set in the same way as the normal position,
keys are reversed.
18 DMX signal connecting
F6324265 have to be connected to DMX line in serial mode, with no branches on DMX control
cable. That means that DMX line, from the signal source, must be connected to DMX IN pins of
F6324265 and later, directly from DMX OUT pins to the next device in DMX chain.
If the F6324265 is the last DMX chain receiver there should be terminator (resistor 120 Ohm)
mounted between "DMX+" and "DMX-" pins of DMX OUT section.
19 RDM – available parameters
The F6324265 supports the DMX-RDM protocol. DMX protocol allows only of a one-way data
transmission, while its extension the RDM protocol can transmit information in two directions.
This makes possible to simultaneously send and receive information, and hence the possibility