SAFE-RAIN F6324265, Руководство пользователя, Страница: 17 / 25

17
Please note that after restoring to default settings, all the operating parameters of the device
will revert to the following ones:
• DMX address : 1
• driver operating mode : RGB (3b – 3 byte)
• master mode : off
• number of sent DMX channels : 128
• white balance : off
• no signal operating mode : scene (all channels controlled at 50%)
• frequency : 366Hz
• smooth function : off
16.2 Error message.
The device is equipped with a built-in memory work control function. If there are problems with
the memory operation on the F6324265 display, the Err message appears – memory error.
In this situation, select the “enter” key. The device will reload the default configuration and
upload it to the memory. If after this operation, the Err message remains on the screen, the
memory is permanently damaged and the unit must be sent to the service point.
17 Display function.
As the driver should be installed (As far as possible) in a small distance from the controlled
LEDs, the lack of space may force the necessity of mounting the device upside-down. In such
case the displayed messages become illegible, that does not have the influence on device
operation, but makes the programming much more difficult.
That is why the F6324265 driver has a display flip feature available. It turns the screen 180°. The
keys order is reversed as well.